| Author | Dario Goldfarb, Max Bloomfield, Matthew Colburn |
|---|---|
| Title | Thermo-mechanical behavior of EUV pellicle under dynamic exposure conditions |
| Year | 2016 |
| Journal | Extreme Ultraviolet (EUV) Lithography VII |
| Volume | 9776 |
| Pages | 977621-1 -- 977621-11 |
| Collection | Proceedings of the SPIE |
| Editor | Eric M. Panning |
| Abstract | The utilization of EUV pellicles as protective layers for EUV masks requires the use of refractory materials that can tolerate large temperature excursions due to the non-negligible absorption of EUV radiation during exposure. Additionally, the mechanical stress induced on the EUV pellicle by the thermal load is dependent on the thermal expansion of the material which can be responsible for transient wrinkling. In this study, an ultrathin (20 nm), freestanding membrane based on silicon nitride is utilized as a learning vehicle to understand the material requirements of EUV pellicles under dynamic exposure conditions that are typical of commercial EUV scanners. First, the nanoscale radiative properties (emissivity) and thermo-mechanical failure temperature of the dielectric film under vacuum conditions are experimentally investigated utilizing a pulsed ArF (193 nm) probing laser. The silicon nitride membrane is found to be marginally compatible with an equivalent 80W EUV source power under steady state illumination conditions. Next, the thermal behavior of the EUV pellicle under dynamic exposure conditions is simulated using a finite element solver. The transient temperature profile and stress distribution across the membrane under stationary state conditions are extracted for an equivalent 60W EUV power source and the pellicle wrinkling due to heating and consequent impact on CD uniformity is estimated. The present work provides a generalized methodology to anticipate the thermal response of a EUV pellicle under realistic exposure conditions. |
| PDF File |  Download |
| DOI Link | 10.1117/12.2218453 |